3A 4A 5A/13x Molecular Sieve (Honeycomb Ceramic/Strip/Granules/Beads/Powder)
Molecular sieve is a material of crystalline metal aluminosilicates that having an interconnecting network of zeolite and alumina tetrahedral. Molecular sieve is used as a desiccant and adsorbents. It is very small pores while allowing small pores to pass; it is efficient to block large molecules. That becomes powerful adsorbents with having the strong adsorption capacity with water, oxygen, carbon dioxide, and other molecules less than its pore size. We supply honeycomb molecular sieves, 3a, 4a,5a molecular sieves, strip molecular sieves and granular molecular sieves.
Honeycomb ceramic molecular sieve is a kind of high-efficiency molecular sieve with good adsorption performance, no secondary pollution, and high temperature regeneration. It has an efficiency of 40% higher than that of similar activated carbon. It has been widely used in the fields of adsorption, separation, catalysis and environment. It is more suitable for large air volume, low air volume and high-concentration organic waste gas treatment.
DetailsThe pore size of 3A molecular sieve is 3A(angstrom). It does not absorb any molecular larger than 3A. According to the industrial application specialties, we endue our products with the characters of higher adsorption speed, stronger crushing strngth and anti-contaminative resistance, more cyclic times and longer work-span. All these advantages have made it come to be the most essential and necessary desiccant in the fields of the deep drying, refinery polymerization for cracked gasses, ethylene, propylene and any other non-acidicgasses of liquids in petroleum and chemical industries.
Details4A molecular sieve is the sodium form of the Type A crystal structure. The pore size of 4A molecular sieve is 4A(angstrom). It is mainly used to absorb water, methanol, ethanol, sulfureted hydrogen, carbon dioxide, ethylene, propylene, does not absorb any larger molecular than 4A, and oftern used as desiccant in many insdustriels.
DetailsThe pore size for 5A molecular sieve is about 5A(angstrom). It can absorb all kinds of molecular smaller than this size, it is mainly used in separation of the normal and isomerous alkane, pressure swing adsorption(PSA) for gases, co-adsorption of moisture and carbon dioxide. Based on the industrial application specialities, we have produced out our own PSA molecular sieve products, which have better selective absorb ability and more rapid adsorption speed. Being the elaborated products, it could be suitable for gases generationa nd concentration PSA plants of any sizes and any types in the world.
DetailsType 5A small oxygen enrichment molecular sieve is a kind of appropriative molecular sieve specially designed for medical or healthy household oxygen generator – a mini PSA device for medical or household application. The product has the feature of high purity of oxygen concentrating and long lifespan. It is already widely used in the medical care and household healthy field.
DetailsThe pore size for molecular Sieve 13X HS is about 10A(angstrom). It absorbs any molecules less than 10A, mainly used as catalyst carrier, co-absorption of CO2 and H2O, co-absorption of H2O and H2S. It is used as desiccant for natural gas, LPG(liquefied petroleum gas), aerosols.
DetailsActivated alumina has many capillary pores and large specific surface area. It can be used as adsorbent, desiccant and catalyst carrier. At the same time, it also depends on the polarity of the adsorbed substance. It has a strong affinity for water, oxides, acetic acid, alkali, etc. It is a low-water deep desiccant and an adsorbent that adsorbs polar molecules.
Activated alumina fluoride removal is similar to anion exchange resin, but the anion resin is more selective for fluoride ions. Activated alumina has good adsorption and defluorination effect and stable capacity.
DetailsActivated carbon is a very good adsorbent. It uses charcoal, bamboo charcoal, various fruit and high-quality coals as raw materials. It was manufactured by applying physical and chemical methods, for example, crush, sieving, catalyst activation, rinsing, drying and screening. With dual characteristics of physical adsorption and chemical adsorption, it can selectively adsorb various substances in the gas and liquid phases to achieve decolorization, purification, disinfection, deodorization, decontamination and purification.
Details