1. Home
  2. Products
  3. Molecular Sieve
  4. Activated Alumina
Quantity

Activated Alumina

  • Product Description of Activated Alumina

Activated alumina has many capillary pores and large specific surface area. It can be used as adsorbent, desiccant and catalyst carrier. At the same time, it also depends on the polarity of the adsorbed substance. It has a strong affinity for water, oxides, acetic acid, alkali, etc. It is a low-water deep desiccant and an adsorbent that adsorbs polar molecules.

Activated alumina fluoride removal is similar to anion exchange resin, but the anion resin is more selective for fluoride ions. Activated alumina has good adsorption and defluorination effect and stable capacity.

This product has high strength, low wear, water immersion, no softening, no swelling, no powdering, and no cracking. It can be widely used in the deep drying of petroleum cracking gas, ethylene and propylene gas, hydrogen production, drying of air separation units, instrument air dryers, and fluoride treatment in hydrogen peroxide. It can also remove pollutants such as hydrogen sulfide, sulfur dioxide, hydrogen fluoride, hydrocarbons and other pollutants in the exhaust gas, and is especially suitable for the defluorination treatment of fluorine-containing water.

  • Typical Application

• Drying dehydration of air, natural gas and petroleum cracked gas.

• Drinking water removal of fluoride.

• Special catalyst for hydrogen peroxide production by ranunculus quinone method.

• Dechlorination of viscous resin.

• Catalyst carrier.

• Special for air separation and oxygen production industry.

  • Physical Properties
Model KA401 (Absorbent) KA402 (Defluorinating) KA403 (For Oxydol) KA404 (Antichlor) KA405 (Catalyst carrier) KA406 (For Air-separation)
Appearance and Shape White Sphere
Crystal Types χ-ρ χ-ρ γ χ-ρ γ χ-ρ
Chemical Composition Al2O3 ≥93 ≥93 ≥92 ≥90 ≥93 ≥90
Na2O ≤0.3 ≤0.3 ≤0.5 - 0.15-0.3 0.3
1.L 6-8 6-8 ≤8 ≤8 ≤5 6-8
Bulk Density g/ml 0.68-0.72 0.70-0.75 0.65-0.75 0.68-0.78 0.70-0.80 0.68-0.72
SBET ㎡/g ≥280 ≥280 200-260 ≥300 ≥200 ≥300
Porosity ml/g 0.30-0.45 0.30-0.42 0.40-0.46 0.30-0.50 0.4 0.30-0.50
Absorption % (Water) 12 (Fluorine) 50 (Water) 10-20 (Chlorine) 50-70 (Water) 17-19 (Chlorine)
Activity % 56-62
Attrition % ≤1.0 ≤1.0 ≤1.0 ≤0.7 ≤0.4 ≤0.8
Compressive Strength 0.4-1.2 - - - - - -
1-2 ≥40 ≥40 - ≥40 - -
2-3 ≥60 ≥60 - - - -
3-5 ≥100 - ≥100 ≥80 - ≥100
4-6 ≥120 - ≥130 ≥120 - ≥110
Welcome to send your message to us
*Email
!!
*Content
!
Product Name
Your Name
Company
Tel/Fax.
Msn/Skype