Activated carbon is a very good adsorbent. It uses charcoal, bamboo charcoal, various fruit and high-quality coals as raw materials. It was manufactured by applying physical and chemical methods, for example, crush, sieving, catalyst activation, rinsing, drying and screening. With dual characteristics of physical adsorption and chemical adsorption, it can selectively adsorb various substances in the gas and liquid phases to achieve decolorization, purification, disinfection, deodorization, decontamination and purification.
This product is made of high-quality activated carbon as a carrier and introduced with a highly active desulfurization catalyst surface. It can achieve high-precision removal of inorganic sulfides and organic sulfides in various raw materials under normal temperature, normal pressure or variable pressure. It is suitable for the desulfurization in the production process of synthetic ammonia, methanol, combined alcohol, methanation gas synthetic fuel, food, polypropylene, etc. It can also be used for urban coal gas, water gas, semi-water gas, coke oven gas, liquefied petroleum gas, natural gas. Equal fine desulfurization can desulfurize hydrogen sulfide to =0.3PPM.
Mainly used for the recovery of organic solvents such as benzene, toluene, toluene, ether, ethanol, acetone, gasoline, trimethane, and tetrachloromethane.
Mainly used for gas phase and liquid phase adsorption, as a catalyst carrier.
Mainly used for dechlorination, oil removal of industrial water and deep purification of sewage.
Mainly used to remove pollutants in the air and separation and purification of gases.
Type | HT101 | HT102 | HT103 | HT104 |
SBET (㎡/g) | ≥1200 | ≥1100 | ≥1300 | ≥1100 |
Porosity (ml/g) | 0.4-0.55 | 0.4-0.55 | 0.45-0.60 | 0.38-0.55 |
Bulk Density (g/ml) | 0.44-0.50 | 0.44-0.50 | 0.44-0.50 | 0.42-0.50 |
Specific Heat (Cal/gram·℃) | -0.24 | -0.24 | -0.24 | -0.24 |
Ignition Point (℃ ) | 420 | 420 | ||
Particle Size (mesh) | 4-8≥90% | 6.16≥90% | Customized | 10-28≥90% |
Strength (%) | ≥95 | ≥97 | ≥90 | ≥95 |
Loss on Drying (%) | ≤10 | ≤10 | ≤10 | ≤10 |
Ash Content (%) | ≥4 | ≥4 | ≥4 | ≥4 |
PH Value | ≥7 | ≥7 | ≥7 | ≥7 |
Iodine Value (mg/g) | ≥850 | ≥850 | ≥900 | ≥850 |
Benzene Adsorption (%) | ≥45 | ≥40 | ≥40 | ≥40 |
Carbon Tetrafluoride Adsorption (%) | ≥60 | ≥60 | ≥60 | ≥13 |